HP Printer Error Code 20 is caused by an issue with the HP printer not being correctly configured on your system. This error typically shows when using your computer to try and print a document, image or spreadsheet and you then decide to print that document with your HP printer the following error message might appear.

What Causes The HP Printer Error Code 20 To Appear?

There are several reasons why the HP Printer Error Code 20 appears, including the following:

             The printer you are using is not set as the default printer.

             The printer driver is missing.

             There are conflicts in the device manager.

             Registry errors on your system.

To fix this error, you first need to ensure that you have your HP Printer set up correctly, and that you don’t have any damaged or corrupt settings on your PC, that might prevent your printer from working. Here are the steps you should take to resolve this issue:

If you have a printer. You use it in a home or office. So sometimes you have to face difficulties in many ways. Such as printers of printers, repeat paper repairs or Paper Jam error, paper not load OR pick, error code coming on the printer screen or printer’s on-screen Not only (Printer Dead) today will tell you how to fix problems in the printer. By which you will be able to fix the problems of the printer by understanding it.

Related Blog: HP Envy 4520 Printer Offline

There are three types of printers. Dot Matrix Printer, Inkjet Printer, and Laserjet Printer, and they meet many companies. But here you will tell about the Scanner 20 error coming to the Hp Laserjet m1005 Printer. In the Hp m1005 printer, this error comes due to not working on the scanner. Two types of scanners are used in this printer.

Scanner Head: The scanner head is attached to the printer. Documents are scanned by this method.

Scanner 20 Error Scanner Head: Scanner 20 Error Scanner comes when the head does not work. The reason for not doing this can be the following. This scanner has a motor and a laser light tube. The scanner error comes when the laser light does not work or the flat cable connecting it with the main PCB.

•             Scanner head may be defective.

•             The cable connecting the scanner is bad. Or cut off.

•             Scanner flat cable pins can be dirty

•             The scanner cable is not properly connected or loose.

 Hp Laser Printer Scanner 20 error Solution

•             First of all, remove the scanner cable carefully and clean it with rubber etc. and clean it again.

•             Seeing the cable changed.

•             Finally, changing the scanner to change

Source URL: HP Printer Error 20